Ball joint stem diameter 50 and 63 M16x1.5 maintenance-free

Ball joint for pneumatic cylinder rod diameter 25 and 32 mm. Type GA-M. M10x1.25mm thread, maintenance-free. Reference: TSF101C Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

TSF101C

€8.72 (€7.09 tax excl.)

Pneumatic cylinder accessories

Ball joint rod diameter 40 M12x1.25 maintenance free

Ball joint for pneumatic cylinder rod diameter 40 mm. Type GA-M. Female thread M12x1.25mm, maintenance-free. Reference: 80801225 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

TSF121C

€8.88 (€7.22 tax excl.)

Pneumatic cylinder accessories

Ball joint rod diameter 80 and 100 M20x1.5 maintenance-free

Ball joint for pneumatic cylinder rod diameter 80 and 100 mm. Type GA-M, with female thread M20x1.5mm, maintenance-free. Reference: TSF20C Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

TSF20C

€24.65 (€20.04 tax excl.)

16 other products in the same category:

Rear female charnela for diameter cylinder 63 AIRON - adajusa

Pneumatic cylinder accessories

Charnela female rear cylinder diameter 63

Aluminum rear female charnela for cylinder Ø63 ISO joints. Mounting on pneumatic cylinders.Reference: CF.063Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

CF063

€13.38 (€10.88 tax excl.)

Rear joint male for diameter cylinder 32 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 32

CM032

€9.70 (€7.89 tax excl.)

Male rear joint for pneumatic cylinder diameter 32mm.Reference: CM.032Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Front fixing flange diameter 40

Front flange for fixing a 40mm diameter pneumatic cylinder. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.040 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

FV040

€13.05 (€10.61 tax excl.)

Magnetic sensor hall PNP 3-wire M8 connector and sensor clamp diameter 20 - Metal Work - adajusa.es

Magnetic sensor hall PNP 3-wire M8 connector and sensor clamp diameter 20 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wires M8 connector and clamp 20 - Metal Work

Magnetic sensor, magnetic detector, normally open (NA), with hall magnetic capture and PNP output, with M8 connector. and fixing bracket for cylinders 20 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

PK-W095394620

€39.05 (€31.75 tax excl.)

Pneumatic cylinder accessories

Front fixing flange diameter 100

Front flange for fixing a 100mm diameter pneumatic cylinder. For ISO standard cylinders, made of steel. This flange is valid for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: FV.100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

FV100

€30.52 (€24.81 tax excl.)

Pneumatic cylinder accessories

Magnetic reed sensor 2 wires M8 connector - Aignep

Aignep

DT01RM8

€18.78 (€15.27 tax excl.)

Magnetic sensor, magnetic detector, 2-wire "reed" type contacts, operating range 5 - 240V with M8 connector 300mm long . Valid for mounting on any cylinder with standard "T" type slot , such as ISO cylinders of the Metal Work , Mindman or Aignep brands ( L and X series). Series: Sensors Reference: DT01RM8 Representative image for illustrative purposes,...

3-Wire PNP Hall Magnetic Sensor M8 Connector - Metal Work - ADAJUSA

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3-wire M8 connector - Metal Work

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall collector and PNP output, with M8 connector. Valid for mounting on ISO Metal Work and Mindman cylinders. Reference: W095431 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

W095431

€35.57 (€28.92 tax excl.)

Full ISO square articulation - ADAJUSA 2

Pack

Pneumatic cylinder accessories

Square joint ISO full diameter 50

Full square articulation (tray, shaft and back cover) in aluminium for ISO cylinder of Ø50Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PK-CFPCAS050

€26.80 (€21.79 tax excl.)

Pneumatic cylinder accessories

Ball joint rod diameter 40 M12x1.25 maintenance free

TSF121C

€8.88 (€7.22 tax excl.)

Magnetic sensor reed 2 wires with M8 connector and sensor clamp diameter 20 - Metal Work - adajusa.es

Magnetic sensor reed 2 wires with M8 connector and sensor clamp diameter 20 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor reed 2 wires M8 connector and clamp 20 - Metal Work

Magnetic sensor with cable included 2 wires (reed) with M8 connector and fixing bracket for cylinders 20 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

PK-W095184620

€31.70 (€25.77 tax excl.)

Squadron fixing cylinder diameter 80 - ADAJUSA

Pneumatic cylinder accessories

Fixing Squad cylinder diameter 80

Fixing Squad for pneumatic cylinder diameter 80mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.080 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PB080

€9.09 (€7.39 tax excl.)

Magnetic sensor reed (2 wires) with connector and cable - Metal Work

Magnetic sensor reed (2 wires) with connector and cable - Metal Work 2

Pneumatic cylinder accessories

Magnetic sensor reed 2 wires connector and cable - Metal Work

Magnetic detector sensor with cable and connector included 2 wires. Reference: W0950000201 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

W0950000201

€34.43 (€27.99 tax excl.)

Magnetic sensor reed 2 wires with cable 5m - ADAJUSA

Pneumatic cylinder accessories

2-wire magnetic reed sensor with 5m cable

Magnetic sensor, magnetic detector, contacts type "reed" 2-wire, with 5m cable included. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep.Reference: SMT.2D.A.5M Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

SMT2DA5M

€21.49 (€17.47 tax excl.)

Fixed squadron cylinder diameter 40 - ADAJUSA

Pneumatic cylinder accessories

Fixing Squad for cylinder diameter 40

Fixing Squad for pneumatic cylinder diameter 40mm. Reference: PB.040 This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PB040

€3.73 (€3.03 tax excl.)

Pack

Pneumatic cylinder accessories

Rear joint ISO full diameter 100

Full straight rear artifice in aluminium for ISO cylinder of Ø100 1 Hind female Charnela 1 Shaft (bolt) 1 Rear male charnela Screws Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PK-CMPCCF100

€52.13 (€42.38 tax excl.)

Pneumatic cylinder accessories

Diameter axis 125 for ISO joint

Shaft (bolt) Ø125 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.125Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

PC125

€6.86 (€5.58 tax excl.)

Customers who bought this product also bought:

Pneumatic cylinder accessories

Ball joint rod diameter 80 and 100 M20x1.5 maintenance-free