Rear joint Iso full diameter 32

Fixing Squad for pneumatic cylinder diameter 32mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.032 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PB032

€3.51 (€2.85 tax excl.)

Support magnetic detector cylinder Ø32-Ø40 - Metal Work - ADAJUSA

Pneumatic cylinder accessories

Magnetic detector support cylinder diameter 32/40 - Metal Work

Support for magnetic detector, allows the installation of this detector on pneumatic cylinders of diameter 32 or 40 mm. Reference: W0950000711Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

W0950000711

€7.20 (€5.85 tax excl.)

Aluminum counter-plate for cylinder - adajusa.com.

Pneumatic cylinder accessories

Countercharnela aluminum cylinder diameter 32

Aluminum countercharnella for cylinder Ø32 ISO joints. Mounting on pneumatic cylinders.Reference: AS.032Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

AS032

€9.45 (€7.68 tax excl.)

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 40mm with axle

Female rear joint for cylinder Ø40 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

PK-CFPC40

€11.51 (€9.36 tax excl.)

16 other products in the same category:

Support magnetic detector cylinder Ø50 - Ø63 Metal Work - ADAJUSA

Pneumatic cylinder accessories

Magnetic detector support cylinder diameter 50/63 - Metal Work

Support for magnetic detector, allows the installation of this detector on pneumatic cylinders of diameter 50 or 63 mm.Reference: W0950000712Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

W0950000712

€7.20 (€5.85 tax excl.)

Pneumatic cylinder accessories

Extension for magnetic sensors with straight connector 2m - Aignep

Aignep

PX2000PUR

€11.62 (€9.45 tax excl.)

3-wire cable or extension with a 2-meter-long straight connector for magnetic sensors, made of polyurethane (PUR), offering high resistance to abrasion and chemicals in industrial environments. It is used to extend the distance between the sensor and the actuator in industrial applications.Series: SensorsReference: PX2000PUR Representative image for...

Magnetic sensor reed 2 wires with M8 connector and sensor clamp diameter 16 - Metal Work - adajusa.es

Magnetic sensor reed 2 wires with M8 connector and sensor clamp diameter 16 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor reed 2 wires M8 connector and clamp 16 - Metal Work

Magnetic sensor with cable included 2 wires (reed) with M8 connector and mounting bracket for cylinders 16 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

PK-W095184616

€32.30 (€26.26 tax excl.)

Fixed squadron cylinder diameter 32 - ADAJUSA

Pneumatic cylinder accessories

Cylinder fixing Squad diameter 32

PB032

€3.51 (€2.85 tax excl.)

Female fork M4x0,7 with 4x8 clip - ADAJUSA

Female fork M4x0,7 with 4x8 clip - ADAJUSA 2

Pack

Pneumatic cylinder accessories

Female fork M20x1,5 with clip 20x40 - for cylinder diameter 80 and 100

Female fork with M20x1.5 thread and clip. The fixings have a U-shaped design and two holes for inserting a pin. Its main application is joints and forks for pneumatic cylinder stems.Rod connection thread: M20x1,5mm Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PK-HORM2015

€18.18 (€14.78 tax excl.)

Rear joint male for diameter cylinder 50 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 50

CM050

€11.87 (€9.65 tax excl.)

Male rear joint for pneumatic cylinder diameter 50mm.Reference: CM.050Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Charnela rear female for diameter cylinder 40 AIRON - adajusa.es

Pneumatic cylinder accessories

Charnela female rear cylinder diameter 40

Aluminum rear female charnela for cylinder Ø40 ISO joints. Mounting on pneumatic cylinders.Reference: CF.040Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

CF040

€9.38 (€7.63 tax excl.)

Pack

Pneumatic cylinder accessories

Rear joint for cylinder diameter 32mm with axle

Female rear joint for cylinder Ø32 manufactured according to ISO standard. Mounting on pneumatic cylinders. Made of aluminum. The supply includes the shaft.Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

PK-CFPC32

€10.47 (€8.51 tax excl.)

Pneumatic cylinder accessories

Ball joint rod diameter 25 and 32 M10x1.25 maintenance-free

Ball joint for pneumatic cylinder rod diameter 25 and 32 mm. Type GA-M. M10x1.25mm thread, maintenance-free. Reference: TSF101C Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

TSF101C

€8.72 (€7.09 tax excl.)

Fine pitch nuts

Zinc-plated hex nut DIN-934 fine pitch M12x125

Generico-BTH

TUFI0M12125

€0.01 (€0.01 tax excl.)

Zinc plated nut DIN 934 fine pitch, thread M12, pitch 1,25mm. Hexagonal shaped nut made of iron with zinc plated corrosion resistant coating, silver tone finish. Intended for strong fastening with metric screws, valid for multiple applications and sectors. Compatible with pneumatic cylinders with a diameter of 40mm. Allows to secure the piston rod to the...

Pneumatic cylinder accessories

Diameter axis 80 for ISO joint

Shaft (bolt) Ø80 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.080Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

PC080

€3.22 (€2.62 tax excl.)

Magnetic sensor hall PNP 3 wires with cable - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor PNP 3-wire with cable

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and PNP transistor output, with 3-wire cable included. Cable length 3m. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Part number: SMT.ED Representative image for illustrative purposes, the...

SMTED

€28.13 (€22.87 tax excl.)

Aluminum front female charnela for cylinder adajusa

Pneumatic cylinder accessories

Rear female charnela for cylinder diameter 125

Aluminum rear female charnela for cylinder Ø125 ISO joints. Mounting on pneumatic cylinders.Reference: CF.125Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

CF125

€40.44 (€32.88 tax excl.)

3-wire PNP magnetic hall sensor with cable and sensor clamp diameter 16 - Metal Work - adajusa.es

3-wire PNP magnetic hall sensor with cable and sensor clamp diameter 16 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3 wires cable and clamp 16 - Metal Work

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall pickup and PNP output, with cable included 3 wires and fixing bracket for cylinders 16 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

PK-W095390616

€31.02 (€25.22 tax excl.)

Pack

Pneumatic cylinder accessories

Female fork M4x0.7 with 4x8 clip

Female fork with M4x0.7 thread and clip. The fixings have a U-shaped design and two holes for inserting a pin. Its main application is joints and forks for pneumatic cylinder stems.Rod connection thread: M4x0.7mm Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PK-HORM407

€1.85 (€1.50 tax excl.)

Fixed squadron cylinder diameter 100 - ADAJUSA

Pneumatic cylinder accessories

Cylinder fixing Squad diameter 100

Fixing Squad for pneumatic cylinder diameter 100mm. This fixing bracket is suitable for cylinders manufactured according to ISO 15552 - ISO 6431 of any brand. Reference: PB.100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PB100

€12.40 (€10.08 tax excl.)

Customers who bought this product also bought:

Pack

Pneumatic cylinder accessories

Female fork M20x1,5 with clip 20x40 - for cylinder diameter 80 and 100

Pneumatic cylinder Ø32 stroke 125mm, double magnetic effect and with pneumatic cushioning. Made in Italy according to ISO 15552 (Ex ISO 6431). Extruded aluminum body with grooves for magnetic detectors, chrome-plated steel piston rod. ATEX cylinders as standard.Reference: LH0320125 Representative image for illustrative purposes, the item supplied will...

PK-HORM2015

€18.18 (€14.78 tax excl.)

Pneumatic cylinders 32

Pneumatic cylinder 32x125 double-acting LH0320125 - Aignep

LH-032-0125

€61.91 (€50.33 tax excl.)

View

Pneumatic cylinders 32

Pneumatic cylinder 32x50 double-acting LH0320050 - Aignep

LH-032-0050

€57.06 (€46.39 tax excl.)

Pneumatic cylinder Ø32 stroke 50mm, double magnetic effect and with pneumatic cushioning. Made in Italy according to ISO 15552 (Ex ISO 6431). Extruded aluminum body with grooves for magnetic detectors, chrome-plated steel piston rod. ATEX cylinders as standard.Reference: LH0320050 Representative image for illustrative purposes, the item supplied will...

View

Rear joint male for diameter cylinder 63AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 63

CM063

€14.77 (€12.01 tax excl.)

Male rear joint for pneumatic cylinder diameter 63mm.Reference: CM.063Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pack

Pneumatic cylinder accessories

Female fork M16x1,5 with clip 16x32 - for cylinder diameter 50 and 63

PK-HORM1615

€11.07 (€9.00 tax excl.)

Female fork with M16x1.5 thread and clip. The fixings have a U-shaped design and two holes for inserting a pin. Its main application is joints and forks for pneumatic cylinder stems.Rod connection thread: M16x1.5mm Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Ball joint rod diameter 25 and 32 M10x1.25 maintenance-free