Female fork M20x1,5 with clip 20x40 - for cylinder diameter 80 and 100

Female fork with M4x0.7 thread and clip. The fixings have a U-shaped design and two holes for inserting a pin. Its main application is joints and forks for pneumatic cylinder stems.Rod connection thread: M4x0.7mm Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PK-HORM407

€1.88 (€1.53 tax excl.)

Female fork M4x0,7 with 4x8 clip - ADAJUSA 2

Pack

Pneumatic cylinder accessories

Female fork M16x1,5 with clip 16x32 - for cylinder diameter 50 and 63

Female fork with M16x1.5 thread and clip. The fixings have a U-shaped design and two holes for inserting a pin. Its main application is joints and forks for pneumatic cylinder stems.Rod connection thread: M16x1.5mm Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PK-HORM1615

€11.29 (€9.18 tax excl.)

Pack

Pneumatic cylinder accessories

Female fork M12x1,25 with clip 12x48

Female fork with M12x1.25 thread and clip. The fixings have a U-shaped design and two holes for inserting a pin.Rod connection thread: M12 x 1.25 L.48 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PK-HORM121258

€6.54 (€5.32 tax excl.)

16 other products in the same category:

Aluminum counter-plate for cylinder - adajusa.com.

Pneumatic cylinder accessories

Countercharnela aluminum cylinder diameter 32

Aluminum countercharnella for cylinder Ø32 ISO joints. Mounting on pneumatic cylinders.Reference: AS.032Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

AS032

€9.83 (€7.99 tax excl.)

Pneumatic cylinder accessories

Extension for magnetic sensors with straight connector 5m - Aignep

3-wire cable or extension with a 5-meter-long straight connector for magnetic sensors, made of polyurethane (PUR), offering high resistance to abrasion and chemicals in industrial environments. It is used to extend the distance between the sensor and the actuator in industrial applications. Series: Sensors Reference: PX5000PUR Representative image for...

PX5000PUR

€15.90 (€12.93 tax excl.)

Pack

Pneumatic cylinder accessories

Female fork M16x1,5 with clip 16x32 - for cylinder diameter 50 and 63

PK-HORM1615

€11.29 (€9.18 tax excl.)

Support magnetic detector cylinder Ø50 - Ø63 Metal Work - ADAJUSA

Pneumatic cylinder accessories

Magnetic detector support cylinder diameter 50/63 - Metal Work

Support for magnetic detector, allows the installation of this detector on pneumatic cylinders of diameter 50 or 63 mm.Reference: W0950000712Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

W0950000712

€7.49 (€6.09 tax excl.)

Aluminum cylinder countercharnella Ø40 - ADAJUSA

Pneumatic cylinder accessories

Contracharnela aluminum cylinder diameter 40

Aluminum countercharnella for cylinder Ø40 ISO joints. Mounting on pneumatic cylinders.Reference: AS.040Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

AS040

€13.31 (€10.82 tax excl.)

Rear joint male for diameter cylinder 50 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 50

CM050

€12.35 (€10.04 tax excl.)

Male rear joint for pneumatic cylinder diameter 50mm.Reference: CM.050Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic cylinder accessories

Diameter axis 125 for ISO joint

Shaft (bolt) Ø125 to be mounted on ISO joints. Mounting on pneumatic cylinders.Reference: PC.125Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

PC125

€7.27 (€5.91 tax excl.)

Magnetic sensor hall PNP (3 wires) connector - ADAJUSA

Pneumatic cylinder accessories

Magnetic hall sensor PNP 3-wire M8 connector

Magnetic sensor, magnetic detector, normally open (NO), with magnetic hall sensor and PNP transistor output, with 3-pin male M8 connector. Valid for mounting on any cylinder with standard "T" type slot, such as ISO cylinders of the brands Metal Work, Mindman or Aignep. Valid for mounting on ISO cylinders Metal Work, Mindman and Aignep, among...

SMTEC

€38.88 (€31.61 tax excl.)

Pack

Pneumatic cylinder accessories

Female fork M8x1.25 with 8x16 clip - for cylinder diameter 20

Female fork with M8x1.25 thread and clip. The fixings have a U-shaped design and two holes for inserting a pin. Its main application is joints and forks for pneumatic cylinder rods.Rod connection thread: M8 x 1.25Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

PK-HORM8125

€2.89 (€2.35 tax excl.)

Rear joint male for diameter cylinder 100 AIRON - adajusa.es

Pneumatic cylinder accessories

Rear joint male cylinder diameter 100

CM100

€26.16 (€21.27 tax excl.)

Male rear joint for pneumatic cylinder diameter 100mm.Reference: CM.100Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Magnetic sensor hall PNP 3-wire connector M8 ATEX - adajusa.es

Pneumatic cylinder accessories

Magnetic sensor hall PNP 3-wire connector M8 ATEX - Metal Work

Magnetic sensor, magnetic detector, normally open (NA), with magnetic collector hall and PNP output, with M8 ATEX connector Reference: W0955A9 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

W0955A9

€46.30 (€37.64 tax excl.)

Aluminum counter-frame for cylinder -50 AIRON - adajusa.es

Pneumatic cylinder accessories

Contracharnela aluminum cylinder diameter 50

Aluminum countercharnella for cylinder Ø50 ISO joints. Mounting on pneumatic cylinders.Reference: AS.050Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

AS050

€14.56 (€11.84 tax excl.)

Pneumatic cylinder accessories

Aluminum countercharnella for cylinder diameter 125

Aluminum countercharnella for cylinder Ø125 ISO joints. Mounting on pneumatic cylinders.Reference: AS.125Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

AS125

€57.79 (€46.98 tax excl.)

Pack

Pneumatic cylinder accessories

Rear joint Iso full diameter 125

Full straight rear artifice in aluminium for ISO cylinder of Ø125 1 Hind female Charnela 1 Shaft (bolt) 1 Rear male charnela Screws Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PK-CMPCCF125

€94.27 (€76.64 tax excl.)

Pack

Pneumatic cylinder accessories

Rear joint ISO full diameter 100

Full straight rear artifice in aluminium for ISO cylinder of Ø100 1 Hind female Charnela 1 Shaft (bolt) 1 Rear male charnela Screws Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

PK-CMPCCF100

€55.19 (€44.87 tax excl.)

Magnetic sensor hall PNP 3-wire connector M8 ATEX and sensor clamp diameter 20 - Metal Work - adajusa.es

Magnetic sensor hall PNP 3-wire connector M8 ATEX and sensor clamp diameter 20 - Metal Work - adajusa.es 2

Pack

Pneumatic cylinder accessories

Magnetic hall sensor PNP 3-wire connector M8 ATEX and clamp 20 - Metal Work

Magnetic sensor, magnetic detector, normally open (NA), with magnetic hall pickup and PNP output, with M8 ATEX connector and mounting bracket for cylinders 20 (ISO 6432).Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

PK-W095A9620

€49.97 (€40.63 tax excl.)

Customers who bought this product also bought:

Self-lubricating sintered bearing A 20x25x20 Selfoil : Adajusa: price

Friction bushings in sintered bronze

Cap sintered bronze self-lubricating 20x25x20mm Selfoil A-20-25-20

SELFOIL

A-20-25-20

€4.98 (€4.05 tax excl.)

Cap sintered bronze cylindrical self-lubricating 20x25x20mm, inner diameter 20mm, outer diameter 25mm, length 20mm. Model suitable for work under radial load, without axial load or with very low axial load. The oil contained in the bearing provides constant lubrication between the bushing and the shaft, so the system does not need additional lubricant and...

Plastic tube clipper for pneumatic tube | ADAJUSA

Plastic tube clipper for pneumatic tube | ADAJUSA 2

Pneumatic tube and accessories

Plastic tube clipper - Metal Work

Clamp tube cutter for plastic tube, pneumatic tube, brake hoses, allows a perfect cut to 90º, ensuring a clean cut of the pipe, eliminating the possibility of deterioration of the racor joints. Made of plastic with a central joint and a high-strength metal sheet.Reference: 814TC01 Representative image for illustrative purposes, the article supplied...

814TC01

€5.17 (€4.20 tax excl.)

Spherical ball joint Ø12 mm SSR - ISB | ADAJUSA | price

Radial ball joints

Spherical ball joint Ø12 mm SSR Series - ISB

12 mm diameter spherical ball joint, for general mechanics applications. Made of steel/bronze. Reference: 80601315 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

SSR 12

€9.34 (€7.59 tax excl.)

1/2 quick exhaust valve Metal Work | ADAJUSA

1/2 quick exhaust valve Metal Work | ADAJUSA 2

Quick exhaust valves

Valve 1/2 quick exhaust - Metal Work

9401201

€18.22 (€14.81 tax excl.)

1/2" quick exhaust valve. Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Swivel T-fitting with female central thread 1/4 tube 8mm technopolymer - Metal Work | ADAJUSA

Intermediate "T" fittings

Swivel T-fitting with 1/4 female central thread, 8mm tube, technopolymer - Metal Work

Rotating "T" fitting for 8mm diameter tube and central socket with 1/4 cylindrical female thread, made of technopolymer and brass. Very simple and effective connection that allows reconnection thousands of times without compromising perfect pneumatic and mechanical retention . Reference: 2L35F10 Representative image for illustrative purposes, the item...

2L35F10

€5.95 (€4.84 tax excl.)

Intermediate elbow fittings

Elbow fitting 90 intermediate elbow pipe 10mm Series 55000 - Aignep

Intermediate 90° elbow fitting for 10mm pipe, made of technopolymer. Very efficient connection simple that allows reconnection thousands of times without compromising the perfect pneumatic and mechanical retention. Series: 55000Reference: 55130 10 Representative image for illustrative purposes, the item supplied will correspond to the...

5513010

€2.48 (€2.02 tax excl.)

Pneumatic steerable flow regulator 3/8 tube diameter 10 | ADAJUSA

Flow and pressure regulators

Flow Regulator 3/8 tube 10 unidirectional adjustable technopolymer

Adjustable flow regulator of 3/8 with fast racor for outer tube Ø10mm. Mounting on cylinder.Reference: RRGSC.3/8.10 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

RRGSC3810

€12.47 (€10.14 tax excl.)

Automatic straight fitting 1/4 pipe 8mm Series 55000 - Aignep| ADAJUSA

Straight fittings

Straight automatic straight fitting 1/4 pipe 8mm Series 55000 - Aignep

Cylindricalstraight male fitting with 1/4 thread for 8mm tube with O-ring, made of chrome-plated brass and the tube extraction ring in acetal resin . Very efficient connection simple that allows reconnection thousands of times without compromising the perfect pneumatic and mechanical retention. Series: 55000Reference: 50020N 8 1/4 Representative...

50020N814

€1.53 (€1.24 tax excl.)

Cylinder diameter 100x500 double effect - Mindman - ADAJUSA

Cylinder diameter 100x500 double effect - Mindman - ADAJUSA 2

Pneumatic cylinders 100

Cylinder 100x500 double effect - Mindman

Mindman

MCQI211100500

€265.35 (€215.73 tax excl.)

Pneumatic cylinder diameter 100x500 double magnetic effect. With pneumatic cushioning, aluminum jacket and chromed steel vastago.Reference: 281MCQI211100500MRepresentative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Fittings swivel elbow

Male cylindrical adjustable elbow fitting 3/8 tube 8mm Series 55000 - Aignep