Soft starter 11kw 25A 400V 2 phases analog
Soft starter 11kw 25A 400V 2 phases analog

Soft starter 22kw 45A 400V 2 phases analogico

€658.57 Tax included

€544.27 tax excl.

Two-phase control soft starter for starting 22Kw 30CV motors with normal load with a maximum number of 10 starts per hour, is microprocessor controlled, adjustments are made by front potentiometers. The use of soft starters increases engine life by reducing mechanical stress and starting currents.

Ref: 2570040045

No queries yet, leave the first!
 

Two-phase control soft starter for starting 22Kw 30CV 400Vac motors with normal load with a maximum number of 10 starts per hour. Allows for a clean and smooth electronic engine start. This type of soft starters provides control of two of the phases while keeping the other direct, the torque of the engine corresponds to the performance of the chart and provides good acceleration.

The use of soft starters, soft starters, avoid mechanical stress and peaks of consumption in the engine, so they manage to increase the life of the engine and optimize the performance of the installation.

Soft starters are designed to replace the classic star-delta starters.

Load Capacity:

  • Power in smooth charging, direct connection: 22Kw (30CV), start in lower time in 5 seconds. I-3xIn.
  • Power in heavy load, direct connection: 15Kw (18.5CV,) start in time less than 10 seconds. I-4.5xIn.
  • Power in soft charge, star connection (6 wires): 30Kw (40CV).
  • Power in heavy load, star connection (6 wires): 22Kw (30CV).

Features:

  • Soft starter control 2 phases.
  • Microprocessor controlled.
  • Optimized soft start.
  • Reduction of peak current and torque strike in acceleration.
  • Standard DIN rail mount facil 35mm.
  • Integrated bypass relay.
  • Allows star connection (6 wires).
  • Parameterization by means of three potentiometers.
  • No additional control voltage required.
  • Do not require neutral network conductor (N).
  • Economical substitute for star-delta starters.
  • Compact design 45mm.
  • Degree of protection IP20.

Functions:

  • Smooth acceleration and deceleration.
  • Potential-free control input for smooth acceleration and deceleration.
  • 3 parameters adjustable separately: Acceleration time, start voltage and deceleration time.
  • Selectable start-up impulse.
  • Potential-free relay output to indicate operating status - bypass unit - and failure (optional).
  • Stop/march state relay (from start of acceleration to end of deceleration (M).

Typical applications:

  • Engines for doors and gates.
  • Bombs, fans.
  • Conveyor belts, assembly lines.

Technical details:

  • Manufacturer: Peter Electronic
  • Ref: 2570040045
  • Voltage: 400Vac.
  • Rated current: 45A.
  • Nominal power: 22Kw.
  • Max. switching frequency at 3xIny 5s tan: 10/h.
  • Max. power dissipation:
    • During operation: 27W.
    • Standby: 7.5W.
  • I2t - Power Semiconductors in A2s: 162000.
  • Min. engine load: 20%.
  • Acceleration ramp type: Current limit.
  • Boot time: 0.5..10s.
  • Starting voltage: 40..80%.
  • Stop time: 0.25..10s.
  • Restart time: 300ms.
  • Output contact capacity: 3A/250Vac/30Vdc.
  • Nominal insulation voltage (Ui):
    • Main circuit: 500V.
    • Control and auxiliary circuit: 250V.
  • Weight: 1kg.
  • Dimensions: 52.5x178x158mm.

Dimensiones arrancador suaves VSII 17-45A

Conexionado arrancador suave VSII 3.5-16A

Conexionado arrancador suave VSII 3.5-16 estrella

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

8 other products in the same category:

Reviews
Product added to wishlist
Product added to compare.