Filter filter 3/8 RMSA Size 1 Syntesi Metal Work - ADAJUSA
Filter filter 3/8 RMSA Size 1 Syntesi Metal Work - ADAJUSA

Filter Purifier 3/8 semi-automatic purge Syntesi series - Metal Work

€77.72 Tax included

€63.19 tax excl.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

The job of the scrubber filter is to separate solid or liquid particles dispersed in the compressed air .
This separation is achieved thanks to the special filter element called "coalescing cartridge".

Product made of technopolymer specially indicated to eliminate traces of oil present in compressed air. In the front and rear there is a port that can be used as a pressure gauge, pressure switch or as an additional filter for the inlet air.

Characteristics:

  • Manufacturer: Metalwork
  • Manufacturer reference: 5613D103
  • Threaded drive: 3/8"
  • Group Size: Size 1
  • Filtered degree: 0.01 outlet air purity class ISO8573-1:1.7.2
  • Maximum inlet pressure (bar/Mpa/psi): 15 / 1.5 / 217
  • Flow at 6.3 bar (0.63 MPa; 91 psi) ( Nl/min): 460
  • Min/max temperature at 10 bar; 1MPa; 145psi: -10º to +50ºC
  • Weight: 189g
  • Condensation discharge type: RMSA
  • Fluid type: Compressed air or other inert gases
  • Cup capacity: 15cm³
  • Mounting position: Upright
  • Coupling for additional 1/8" front and rear air intakes
  • Flow rate for additional air intakes at 6.3 bar (Nl/min): 500
  • Wall fixing screws: 2 M4 screws

Dimensions:

For other sizes or references: consult.

Material for professional use, install in compliance with the regulations in force at the place of installation.

For more information, you can download the technical sheet by clicking on the "Annexes" tab.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

Filter-regulator 3/8 technopolymer
Filter groups of 3/8 FR-L

Pneumatic filter-regulator 3/8 0-12 bar purge size 1 semi-automatic series Syntesi -...

Metal Work
5613B263
€44.51 (€36.19 tax excl.)
Filter with 3/8 pneumatic pressure regulator, 3/8 maintenance unit for pneumatic applications, semi-automatic drain, compact size (SY1) and regulation range 0-12 kg/cm2, filtration degree of 20 μm. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing. Series:...
Pressure regulator 1/4 0-12 bar technopolymer - Metal Work
Filter groups of 3/8 FR-L

Pressure regulator 3/8 0-12 bar size 1 Syntesi technopolymer - Metal Work

Metal Work
5613R163
€32.68 (€26.57 tax excl.)
3/8 pressure regulator regulation 0-12, size 1, body in technopolymer extreme reliability. Allows stability of the output pressure at the preset pressure. Possibility of fixing through side holes. Padlock locking system. Syntesi Group Reference: 5613R163 Representative image for illustrative purposes, the supplied article will correspond to the...
Filter 3/4 20 RMSA Size 1 Syntesi Metal Work - ADAJUSA
Filter groups of 3/8 FR-L

Filter 3/8 20 microns semi-automatic drain size 1 Syntesi series - Metal Work

Metal Work
5613F203
€26.72 (€21.72 tax excl.)
3/8 filter, with a filtration degree of 20μm and semi-automatic discharge, size 1, for retention of solid or liquid impurities from the air compressor. These filter cups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing.Series: SynthesisReference: 5613F203Representative image for...

8 other products in the same category:

Home
Product added to wishlist
Product added to compare.