• Pack
Solenoid valve fluids 3/4 2/2 closed 230VAC indirect drive - adajusa.es
Fluid solenoid valve 3/8" 2/2 closed - adajusa.es
Solenoid valve coil 24Vcc 8W T30 diameter 10 - adajusa.es
Solenoid valve connector size 30
Solenoid valve fluids 3/4 2/2 closed 230VAC indirect drive - adajusa.es
Fluid solenoid valve 3/8" 2/2 closed - adajusa.es
Solenoid valve coil 24Vcc 8W T30 diameter 10 - adajusa.es
Solenoid valve connector size 30

Solenoid valve fluids 3/4 2/2 closed 230V 11VA indirect drive D.18

€55.21 Tax included

€45.63 tax excl.

Electrovalve for home automation, fluids or process control, threaded 3/4", normally closed and indirectly driven, with coil of 230Vac 11VA. Step diameter: 18 mm

Working pressure max. 25 bar, and pressure dif. min. 0.15 bar.

fluids:

  • air.
  • Inert gas.
  • Water (max. 75ºC).
  • Mineral oils.
  • Gasoleos.

Esquema electroválvula 2 vías accionamiento indirecto
Manufacturer: Aignep
Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

 

3/4", 2-way, normally closed (NC) membrane solenoid valve, with 230VAC 11VA coil, for use with fluids or air, indirectly operated. Brass body and coil control in stainless steel.

Pitch diameter: 18 mm

In this type of solenoid valves, indirect drive, there must be a small pressure difference between the inlet and the outlet for it to work properly.

The maximum working pressure is 25bar and the pressure differential (P bar) must be at least 0.15 bar.

The solenoid valve is normally closed, i.e. without tension in the coil, the fluid or air will be interrupted through the solenoid valve, when the coil is put into tension the passage of the fluid or air will occur.

The fluids with which this solenoid valve can work are:

  • air.
  • Inert gases.
  • Water (maximum temperature 75oC).
  • Mineral oils.
  • diesel.
  • fuel oil.

Supply includes:

  • Solenoid valve 3/4" 2/2 NC.
  • Coil 230Vac size 30.
  • Connector size 30.

specifications:

  • Manufacturer: Aignep
  • Type of control: indirect drive.
  • Thread size: 3/4".
  • Number of tracks: 2.
  • Number of positions: 2.
  • Configuration: 2/2 closed (NC).
  • Body: Brass.
  • Coil voltage: 230 VAC.
  • Coil power: 11VA.
  • Coil size: 30mm
  • Guide tube, nuclei and spring: Stainless steel.
  • Gasket type: NBR.
  • Fluid type: Pressure air, water (max. 75oC), mineral oils, diesel, oil.
  • Maximum pressure: 25 bar.
  • ISO size 228: 3/4".
  • Step: 12mm.
  • Maximum fluid viscosity (cSt): 25.
  • Valve coefficient (Kv): 2.90 m3/h.
  • Minimum pressure differential (P bar): 0.15 bar.
  • Maximum pressure differential (P bar): 0.15 - 25bar.
  • Working temperature of the solenoid valve: -10oC to +80oC.
  • Fluid temperature: -10oC to +90oC.
  • Installation: Never with the coil down.

Dimensiones electroválvula para fluidos 2/2 NC accionamiento indirecto
Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the data sheet by clicking on the tab "Attachments"

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Customers who bought this product also bought: