• -25%
24Vdc 3.2A 75W DIN rail power supply
24Vdc 3.2A 75W DIN rail power supply

Power supply 24Vdc 3.2A 75W DIN rail

€46.68 Tax included €62.24 -25%

€38.58 tax excl.

Stabilized industrial Power supply , single output 24Vdc, 3.2A. 75W, switching type, 75W power. Supply voltage 100 to 240Vac., protected against overloads and short circuits.

Metal Box for industrial use, DIN rail mounting. High performance and reliability required for industrial use.

Reference: DR75 24Vdc


Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
 

Stabilized industrial Power supply with single output of 24Vdc, nominal intensity 3.2A, and 75W of power. Supply voltage 110..240Vac.

The power supply is mounted in a very robust metal box for industrial use, for mounting on the back panel using screws. High performance and reliability required for industrial use.

With a high overload capacity and short-circuit protection at the output. Automatic reset against overloads and short-circuits.

Cooling by electronically controlled fan, only activated when necessary due to excess temperature.

Technical characteristics:

  • Manufacturer/Supplier: Denor
  • Reference: DR75 24Vdc
  • Operating mode: switched.
  • Mounting: On DIN rail.
  • Input voltage: 100..240Vac.
  • Frequency: 47 .. 63Hz.
  • Output voltage: 24Vdc. (+/- 1%).
  • Output voltage adjustment range: 24±10%.
  • Nominal output current: 3.2A.
  • Rated output power: 76.8W.
  • Maximum commissioning time: less than 1 sec.
  • Ripple and noise: Below 100mVpp.
  • Yield: 80%.
  • Overload protection range: 105~150%.
  • Overcurrent, short circuit and temperature limitation: Yes, self-resettable.
  • Switching frequency: 50Khz.
  • Working temperature: -10ºC .. 60ºC temperature.
  • Cooling: convention.
  • Safety standards: CE, EN60950-1; EN61347; EN61347-2.
  • Complies with EMC regulations: EN55015; EN55022; EN55024; EN61000-2; EN61000-3; EN61547.
  • CE ROHS standard.
  • Dimensions: 55.5x125.2x100mm.
  • Weight: 0.6Kg.

 

Dimensions of the DR-75-24 3.2A 75W 24V switching power supply

Professional use material, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.