Analog thermostat open contact - ADAJUSA
Analog thermostat open contact - ADAJUSA
Analog thermostat open contact - ADAJUSA
Analog thermostat open contact - ADAJUSA

Analog thermostat open contact

€9.73 Tax included

€8.04 tax excl.

Analog thermostat with open contact, DIN rail mount, suitable for temperature regulation inside electrical cabinets and the like. Wide temperature range, between 0o and 60oC. Very compact size and simple installation. Very good switching characteristics.

Ref: NTH

Esquema electrico termostato NA

No queries yet, leave the first!
 

Simple thermostat for temperature control in electrical cabinets or similar environments, with an open contact. Analogue temperature regulation and bimetallic type sensor element.

The contact will close when the set temperature is exceeded. The usual use is the control of ventilation, cooling or alarm elements.

Made of ABS plastic material, very compact size and very easy to install on DIN rail.

They must be located in the upper area of the electrical cabinet with the greatest possible distance from heating elements or other elements that generate heat. The ventilation holes of the thermostat must not be obstructed.

Pay special attention to the power of the load to be connected to the thermostat, it should never be exceeded, the thermostat will irremediably deteriorate due to overload, install the appropriate protection devices, and in the event of needing to use loads that exceed those it can withstand the output contact of the thermostat, install relays or contactors suitable for the load to be connected.

Technical characteristics:

  • Manufacturer/Supplier: OMU/Mixvil
  • Reference: NTH
  • Contact type: 1 open NO
  • Maximum switching capacity 10 (2)A, 230Vac
  • Maximum input current: AC 16A (max. 10 seconds)
  • Temperature regulation range: 0º ~ 60ºC
  • Switching sensitivity: +/- 5°C
  • Handle Color: Blue
  • Sensor Type: Bimetallic
  • Contact type: immediate action
  • Lifespan: >100,000 cycles.
  • Electrical connection: two-pole screw terminal
  • Material: UL94 V-0 Compliant Plastic
  • Mounting: 35mm DIN rail, EN 60715
  • Mounting position: any
  • Weight: 90g
  • Operating temperature:-20°C to +80°C
  • Operating humidity: max. 90% RH (non-condensing)
  • Degree of protection: IP-20

Connection diagram:

AKTS ASJD Thermostat

Connection example:






Note: Bimetal element contacts are subject to environmental influences so contact resistance may vary. This can cause a drop in voltage and/or heating of the contacts.

Dimensions thermostats AKT ASJD


Material for professional use, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.