Double anti-corrosion roller Chain 19.05 3/4 NEPTUNE 12B-2 DIN 8187 - Tsubaki

Anticorrosive roller Chain , in accordance with the requirements of ISO DIN 8187. Made in Japan.

A roller chain is a series of bearings connected by meshes (plates), great versatility and durability in environments with a lot of dust, oil, water, grease, etc... Roller chains develop synchronous power transmission, without slipping, and the effectiveness of the transmission does not depend on the mechanical stress transmitted.

The Neptune chain is a Tsubaki chain that has gone through a special surface treatment process. The link plates, bushings and bearing bolts have a special two-layer coating applied to provide maximum protection from operating or environmental conditions. (Clips are SUS301). Neptune rollers have a special coating designed to resist corrosive conditions, as well as the severe dynamic contact that occurs between the roller and toothed .

This chain can be used in applications subject to alkaline cleaning and in environments exposed to seawater, acid rain and other adverse weather conditions. This chain does not contain any chemically hazardous substances such as hexavalent chromium, lead, cadmium and mercury, as regulated by RoHS√. The power in kilowatts coincides with that of the BS chain, with a working temperature range of: -10°C to +150°C. Above +60°C special high temperature lubrication is necessary. Of course, the BS Lambda Neptune™ chain is also available.

Characteristics:

• Manufacturer: Tsubaki
• Reference: CADE-RS 12B-2-NEP:TSU
• Sale per packaging of 1 meter of chain
• Pitch (P): 19.05mm
• Roller diameter (d ₁ ): 12.07 mm (max)
• Internal width (b ₁ ): 11.68 mm (min)
• Shaft diameter ( _d2 ): 5.72 mm (max)
• union length
  • (L): 42.00mm (max)
  • (Lc): 44.40mm (max)
• Mesh height (h ₂ ): 16.13 mm
• Width between axles (T): 1.85 mm
• Mesh thickness: (Pt): 19.46 mm
• Minimum breaking load (Q ISO/DIN) 57.80 kN
• Average breaking load (Q ₀ ): 66.60 kN
• Approximate weight: 2.31 kg/m

(*) In correct lubrication conditions.

Material for professional use, install in compliance with the regulations in force at the installation site.

For more information you can download the technical sheet by clicking on the "Attachments" tab