1.5kVA (1200W) Automatic Voltage Regulator (AVR) for controlling mains voltage within regulation margins, providing a constant output voltage to supply any load with a clean, stable and safe voltage. Designed to automatically maintain a constant voltage level in order to protect sensitive electronic equipment from voltage surges and drops.
The output voltage regulation type is carried out by voltage steps (12 steps), with a maximum variation of the output voltage of ±3% on the adjusted output voltage. This type of equipment does not provide additional power when the input voltage is cut off; if the input voltage is interrupted, the output voltage is interrupted immediately.
It has a digital display that allows you to see the input and output voltage readings at all times, and includes an industrial Schuko socket to power another device simultaneously, without exceeding the maximum power. Compact and lightweight high-performance device suitable for powering both domestic and small industrial devices.
Technical characteristics:
- Manufacturer/Supplier: Generico-SEV
- Reference: M1-1,5
- Power: 1.5kVA (1200W)
- Maximum output intensity (apparent): 5.2A
- Input correction range: Single phase 140V-260V
- Operating frequency: 47-64Hz
- Output voltage range: Single phase 230V ± 3%
- Overload: 150% for 10 seconds
- Correction speed: 500V/s
- Output waveform: Pure sine wave
- Output protection: Glass fuse (short circuit, over current, low and high voltage protection)
- Power factor: 0.8
- Working principle: Relay model
- Cooling: Natural
- Measurement and indicators: LED display of input and output voltage
- Number of static stages: 4 x 3 = 12 steps
- Charging efficiency: > 96%
- Continuous load
- Operating ambient temperature: -40º ~ +55ºC
- Enclosure protection degree: IP21
- Noise level:
- Dimensions: 16x 11x 30 cm
- Weight: 6Kg
Note: The power in Watts has been calculated based on an installation with a power factor of 0.8. For installations with a power factor less than 0.8, the power in Watts will always be lower than indicated and must be recalculated.
Note: It is highly recommended to install a circuit breaker at the output to ensure that the consumption demand never exceeds the capacity of the equipment.
For further information, you can download the technical sheet by clicking on the "Attached Files" tab.
Professional use material, it must be installed by qualified personnel in compliance with the regulations in force at the place of installation.
English 
Português PT
Adajusa SPAIN
Adajusa FRANCE
Adajusa ITALY
