Digital Vacuostat 1 PNP Output - ADAJUSA
Digital pressure switch 1 output
Digital Vacuostat 1 PNP Output - ADAJUSA
Digital pressure switch 1 output

Digital vacuostat 1 PNP output

€116.58 Tax included

€96.35 tax excl.

Electronic vacuostat, a digital vacuum level measurement device, whose display changes the color of the screen when it reaches the adjustment pressure. It has a programmable PNP transistor output. Large display. Operation with a voltage of 12-24Vcc. Dimensions 30x30x25,4mm.

Reference: PE40V01C2

Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

No queries yet, leave the first!

Digital vacuostat, digital vacuum level measurement element present in its input. It is a pressure control device whose display changes the color of the screen when it reaches the setting pressure. It has a large screen with indication of all the selected functions. Equipped with a digital output with PNP type transistor, short-circuit protected.

It can be configured to be able to work in different units of measurement (kPa, Kgr/cm2, bar and psi).

The display reads directly the vacuum level present in the input, if it is lower than the programmed one it will appear in red, if it is equal to or higher it will appear in green.

The output will remain unactivated as long as the vacuum level at the input is below the adjusted input level, and will be activated when the vacuum level at the input reaches or exceeds the adjusted value.

The input jack is located at the rear and the thread type is G 1/8".


  • Brand: Airon
  • Manufacturer's Reference: PE40V01C2.
  • Measurement type:Empty.
  • Adjustment pressure range: 0.0/-101.3 kPa.
  • Fluid: Non-corrosive and non-combustible air or gas.
  • Resolution: 1kP - 0.01 Kgr/cm2 - 0.01 bar.
  • Supply voltage: 12-24Vdc ±10%, maximum curling ±1%.
  • Current consumption (without load): 45mA.
  • Output type: Digital PNP transistor type protected against short circuits.
  • Maximum output current: 125mA.
  • Maximum output voltage: 24Vdc.
  • Residual voltage at the output: ≤1.5V.
  • Output connection: cable with length of 2m.
  • Repeativility: ±0.2% background scale, ±1 digit.
  • Hysteresis: adjustable.
  • Response time: ≤2.5ms.
  • Display color: Red/Green.
  • Instrument accuracy: ±0.2% background scale, ±1 digit at 25oC±3oC.
  • Color when level is reached: Green.
  • Degree of protection: IP-40.
  • Working temperature: 0..50oC.
  • Weight: 75g.


  • Transpanel mounting bracket: 962PE40B00

Dimensiones presostato

Output Scheme:

Esquema salida de presostato

Mounting add-ons (not included):

Accesorios sujección presostato

Material for professional use, install in compliance with the regulations in force at the place of installation.


Be the first to ask a question about this product!

Question about the product

* Required fields

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.